Polaris Sportsman or Scrambler 6″ Portal Gear Lift
This Super ATV Polaris Scrambler 6″ Portal Gear Lift is what you need if your in the market for portals!
Features:
- Available with billet or cast aluminum housing
- 9310 alloy billet steel precision ground gears are cool and also quiet
- 1.5 in. diameter 4340 hardened steel drive shaft
- No leak bearings and seals
- Universal hub fits all major bolt patterns
- Comes complete with all hardware, backing plates, brakes lines and also instructions
Wheel Requirements:
- 18” or larger wheel required
- 18” wheels cannot exceed 4-1/2” backspacing
- 20” and larger wheels cannot exceed 5” backspacing
Gen 3 Portals are Geared for All
SuperATV’s GDP 6” Portal Gear Lift for the Polaris Scrambler gives you a lift and also a gear reduction in one box. Get the clearance to run bigger tires and the torque you need to turn them. The lift and gear reduction are in the hub which means they maintain suspension geometry and reduce drivetrain stress. Customize by choosing between a 30% or 45% gear reduction and also selecting a cast or billet aluminum housing. GDP portals are truly geared for all.
45%–Perfect for Mud
Install big 6” portals with a 45% gear reduction to get clearance for huge tires and a massive boost in torque. It’ll turn your monster tires like they’re stock and also take your Scrambler through the biggest, thickest mud holes you can find. These portals are pure power — and they’re really good at flingin’ mud.
45%–Perfect for Rocks
A 6” portal box with a 45% gear reduction gives you tons of torque to crawl over any rock or boulder you can find. With that much power, rock shelves will feel like speed bumps and boulders feel like pebbles. With 6” of clearance, you’ll run bigger tires and spend less time getting stuck in the rocks.
30%–Perfect for Everything
A 30% gear reduction lets you turn bigger tires and gives you the versatility to run mud, dominate trails and also hills, and also maintain high speed on the road. It gets your power to the ground to make your ATV more capable on every ride.
Better Gears
Our gears are precision ground and made with 9310 billet steel alloy for high strength and also high speed. That means they’re cool and also quiet even when you’re hammering down the throttle on the road, and they have strength to get you through every nasty mud hole and rock garden.
Stronger Housings by Design
GDP housings are backed by years of experience—we’ve made thousands of them. They’re not amature housings, they’re also professionally made by us and we know what we’re doing. Therefore, whether you want cast or USA-made billet aluminum, you won’t find a better quality housing anywhere else.
- Our housings are reinforced in all the right places
- They’re built with better oil flow and gearing forces in mind
- There are no gimmicks and no vents because vents do more harm than good—we know because we also tested them
Advanced Gaskets and Seals
Lastly, Whether you go with cast or billet, both housings use:
- Advanced Thermo-Tork® gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets
- A sealed input gear and double-lipped output seal
- 100% sealing coverage throughout so you can forget about oil leaks
