Polaris General XP 1000 RackBoss 2.0 Rack and Pinion

Features:

• Heavy-duty dual PTFE bushings:
  • Designed with X24 Tech
  • Prevents wear
  • Reduces slop
  • Improves overall durability
• Available tie rod options:
  • Solid steel bar
  • Swaged tube
• Swaged tube tie rods use:
  • 14 mm outer tie rod ends
  • Rebuildable inner tie rod ends that use 14 mm rod threads and 16 mm rack threads
• Solid steel tie rods use:
  • 3/4” outer tie rod ends
  • Rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack threads
• 65% larger housing than stock
• Over 50% less wear than OEM after 15,000 cycles
• Grease fitting for rack gears

It Doesn’t Get Any Better than RackBoss 2.0
You can use your Polaris General for every kind of job and take it on every adventure. That means that your stock steering rack is gonna wear out and make your handling feel loose eventually. That’s why you need our RackBoss 2.0 Rack and Pinion on your Polaris General XP 1000. It’s a better rack that’s designed to outlast everything else on the market thanks to our X24 Technology. Our design reduces wear by over 50% so you can ride all you want, even with massive tires. Your steering will be tight and responsive for years and years.

Your General XP 1000 Needs X24 Tech
Our X24 Tech takes our General XP 1000 RackBoss 2.0 to the next level. It’s a dual-bushing design that uses PTFE bushings at both ends of the rack to reduce movement in the gearset and tension spring. The result is up to 50% less wear and tear on the rack and tighter handling—no more shaky steering. Plus, it’s greaseable, so you can keep it clean and lubricated.

Solid Steel Bar Tie Rods
Our 1” diameter steel bar tie rods give your General XP 1000’s steering rack the strength it needs to go hard. Whether you’re hauling big loads or navigating nasty washouts with massive tires, you can count on them to hold strong. The rods are paired with beefy tie rod ends that have 3/4” rod threads and 16 mm rack threads. That’s serious strength for serious riders.

Swaged Tube Tie Rods
The swaged tube tie rods are 1” in diameter, delivering impressive strength compared to OEM. Each tie rod end uses beefy heim joints with 16 mm rack threads and 14 mm rod threads for total reliability. Our swaged tube tie rods are designed to endure the most abusive rides year after year.