Moheadz Customz

Moheadz Customz A-Arms for Polaris Ranger 2018-2020 NBSMoheadz Customz prides it’s company in designing some of the strongest a-arms on the market. The a-arms for your Ranger are constructed from 0.250" wall USA DOM and allows for a 35" tall tire. They are portal compatible and allow for a..

Moheadz Customz A-Arms for Polaris Ranger 2021-2024 NBSMoheadz Customz prides it’s company in designing some of the strongest a-arms on the market. These arms are constructed from 0.250" wall USA DOM and allows for a 35" tall tire. They are portal compatible and allow for all OEM hardware,..

Moheadz Customz A-Arms for Polaris RZR Pro (64" Models)Moheadz Customz prides it’s company in designing some of the strongest a-arms on the market. hese arms are constructed from 0.250" wall USA DOM and allows for a 37” tall tire. They are portal compatible and allow for all OEM hardware, ..

Moheadz Customz Can-Am Commander Rear A-Arms These arms are constructed from 0.250" wall USA DOM and allows for a 35-37" tall tire depending on model. Arms are portal compatible and allow for all OEM hardware to be reused. Arms do not include bushings (unless selected below) or grease fittings; you..

Can-Am Defender 65" Model Tie Rod ReplacementMoheadz Customz specializes in designing premium products for Can-Am Defender models. Upgrade your stock tie rods with these heavy duty, upgraded tie rods. This product was designed to replace the OEM rod components from the steering rack to the whee..

Moheadz Customz Can-Am Defender Rear A-Arms (62” Models)Beef up your Defender with these rear arched a-arms by Moheadz Customz. These arms are constructed from 0.250" wall USA DOM and allows for a 35" tall tire. They are portal compatible and allow for all OEM hardware to be reused. A..

Moheadz Customz Can-Am Defender Rear A-Arms (65” Models)Beef up your Defender with these rear arched a-arms by Moheadz Customz. These arms are constructed from 0.250" wall USA DOM and allows for a 36" tall tire. They are portal compatible and allow for all OEM hardware to be reused. A..

Moheadz Customz Can-Am Defender Rear A-Arms (65” Models)Beef up your Defender with these rear arched a-arms by Moheadz Customz. These arms are constructed from 0.250" wall USA DOM and allows for a 37" tall tire. They are portal compatible and allow for all OEM hardware to be reused. A..

Moheadz Customz Can-Am Defender Steering Rack BraceMoheadz Customz designed this steering rack brace to fix a common problem.This brace acts as a support for the OEM rack to eliminate flexing that causes premature failure/cracking.Fitment: ALL 2016-Present Can-Am Defender Warrant..

Moheadz Customz Can-Am Maverick Sport Tie Rod Replacement This product was designed to replace the OEM rod components from the steering rack to the wheel hub. All rods are made from SOLID STEEL using 5/8" heim joints. The clevis uses a hardened thru bolt to allow for easier install and stronger fun..

 Moheadz Customz Forward A-Arms for 64” Can-Am Maverick X3Moheadz Customz prides it’s company in designing some of the strongest a-arms on the market. The a-arms for your X3 are constructed from 0.250" wall USA DOM and allows you to clear a 37” tall tire. They are They are portal comp..

Moheadz Customz Forward A-Arms for 72” Can-Am Maverick X3Moheadz Customz prides it’s company in designing some of the strongest a-arms on the market. These arms are constructed from 0.250" wall USA DOM and allows for a 37" tall tire. Arms are portal compatible and allow for all OEM hardwar..

Moheadz Customz Forward A-Arms for Polaris Xpedition Enhance your Polaris Xpedition with Morehead Offroad Forward A-Arms, designed for the ultimate off-road performance and durability. These A-arms are meticulously engineered to provide superior strength and increased ground clearance, allowing you..

 Moheadz Customz Forward Arms for Can-am Defender 62" ModelsMoheadz Customz prides it’s company in designing some of the strongest a-arms on the market. The a-arms for your Defender are constructed from 0.250" wall USA DOM and allows you to clear a 35” tall tire. They are They are por..

 Moheadz Customz Forward Arms for Can-am Defender 64" ModelsMoheadz Customz prides it’s company in designing some of the strongest a-arms on the market. The a-arms for your Defender are constructed from 0.250" wall USA DOM and allows you to clear a 36” tall tire. They are They are por..

 Moheadz Customz Forward Arms for Can-am Defender 65" ModelsMoheadz Customz prides it’s company in designing some of the strongest a-arms on the market. The a-arms for your Defender are constructed from 0.250" wall USA DOM and allows you to clear a 37” tall tire. They are They are por..

Moheadz Customz Forward Arms for Honda Pioneer 500 & 520Moheadz Customz prides it’s company in designing some of the strongest a-arms on the market. The a-arms for your Pioneer are constructed from 0.250" wall USA DOM and allows you to clear a 35” tall tire. They are They are portal compati..

Moheadz Customz Forward Arms for Honda Pioneer 700Moheadz Customz prides it’s company in designing some of the strongest a-arms on the market. The a-arms for your Pioneer are constructed from 0.250" wall USA DOM and allows you to clear a 33” tall tire. They are They are portal compatible and al..

Moheadz Customz Polaris Ranger 2018-2024 NBS Adjustable Rear A-ArmsThese arms are constructed from 0.250" wall USA DOM and allows for a 35" tall tire. They are portal compatible and allow for all OEM hardware to be reused. Arms do not include bushings. You will re-use OEM bushings or purch..

Moheadz Customz Polaris RZR Pro XP Trailing ArmThese arms are constructed from 0.250" steel plate and are portal compatible. OEM axles, radius rods, sway bar, and hardware compatible.Fitment: ALL 2020-2022 RZR Pro 64” modelWarranty: Arms are covered under a limited lifetime..

Moheadz Customz Xpedition FullTie Rod Replacementt This product was designed to replace the OEM rod components from the steering rack to the wheel hub. All rods are made from SOLID STEEL using 5/8" heim joints. The clevis uses a hardened thru bolt to allow for easier install and stronger functional..

Moheadz Customz Yamaha RMAX 1000 Front Forward A-Arms These front forward arms are constructed from 0.250" wall USA DOM and allows for a 35" tall tire by  raking the front tires a over 2” forward. They are portal compatible and allow for all OEM hardware to be reused, as well as OEM axles. Ste..

Moheadz Customz Yamaha RMAX 1000 Full Tie Rod Replacement This product was designed to replace the OEM rod components from the steering rack to the wheel hub. All rods are made from SOLID STEEL using 5/8" heim joints. The clevis is designed with a hardened thru bolt to allow for easier install and ..

Moheadz Customz Yamaha RMAX 1000 Rear Raked A-Arms These rear raked arms are constructed from 0.250" wall USA DOM and allows for a 35" tall tire (as pictured in the 4 seat machine pictures) by raking the rear tires  2” back. They are portal compatible and allow for all OEM hardware to be reuse..

This is a true long travel suspension that maintains optimal shock geometry. These arms are constructed from 0.250" wall USA DOM and allows for a 35” tall tire. They allow for all OEM hardware, shocks, bushings and ball joints to be reused. Rear arms are adjustable using our patent pending design th..