NOTE:Pioneer 1000 or Pioneer 1000-5 Limited Edition Models will require Rhino 2.0 axles.You may need wheel spacers when running 12” wheels.If you want to run offset A-arms with our 3" Lift Kit, you must have Rhino Brand Axles. Stock axles will bind.Does NOT fit Trail models if us..

Features:Adds 1.5” of rear offsetFit up to 32” rear tiresMade with 1.5” x .138” wall steel DOM tubing0.5” larger than stock0.25” larger than our standard Rear Offset A-Arms1.5” high-clearance designAdjustable pivot blocks for full camber adjustabilityUtilizes stock A-arm bushingsUV-resistant powder ..

Features:  UHMW Material Self-lubricating Low wear characteristics Machined product Number of bushings (8) Small bushings (4) Large bushings (6) Replacement sleeves Enough bushings for the front of your machine (fro..

NOTE:If you want to run a lift kit with these offset A-arms, you must have Rhino Brand Axles. Stock axles will bindIf running a lift kit with these A-arms plus stock wheels in the rear, wheel spacers are requiredFeatures:Adds 1.5” of rear offsetFit up to 31” tires with 1.5” offset front A-armsNote: ..

NOTE:Pioneer 1000 or Pioneer 1000-5 Limited Edition Models will require Rhino 2.0 axles.You may need wheel spacers when running 12” wheels.If you want to run offset A-arms with our 3" Lift Kit, you must have Rhino Brand Axles. Stock axles will bind.Does NOT fit Trail models if us..

UHMW Material Self-lubricating Low wear characteristics Machined product Number of bushings (16) Small bushings (8) Replacement sleevesWhy We Make Them When you're replacing a wear and tear item, it's in your best interest to replace ..

UHMW Material Self-lubricating Low wear characteristics Machined product Number of bushings (8)Bushings (4) Replacement sleeves Enough bushings for front of machine (front, upper, and lower)Why We Make Them When you're replacing..

Features:Adds 1.5” of rear offsetAdds 1.5” of ground clearanceFit up to 28” tires1.25” tubing is larger than stockAdjustable pivot blocks for full camber adjustabilityUtilizes stock A-arm bushingsUV-resistant powder coat finishEasy to installBacked by a lifetime warrantyUpgrade Your SuspensionTaking..

Features:Adds 1” of forward offsetFit up to 28” tires1.25” tubing is larger than stockAdjustable pivot blocks for full camber adjustabilityIncludes A-arm bushingsUV-resistant powder coat finishEasy to installBacked by lifetime warrantyA-Arms that Do MoreThere's nothing more annoying than climbing in..

NOTE: A-arms do not work on the 2017+ deluxe model with factory aluminum wheels.Features: Unique bend design adds 2” of ground clearanceMade with 1” tubingUtilizes stock A-arm bushingsUV-resistant powder coat finishEasy to installBacked by a lifetime warrantyNOTE: Does not include ball joi..

Features:Unique bend design adds 1.5” of ground clearance1” tubingAdjustable pivot blocks for full camber adjustabilityIncludes high-quality UHMW bushings at no extra costUV-resistant powder coat finishEasy to installBacked by a lifetime warranty Rear A-Arms Built for the Trail If you want to..

UHMW Bushing Features Made of ultra durable UHMW Self-lubricating Low-wear characteristicsOEM Replacement Features Uses a steel spherical bearing for strength Bearing can pivot sideways for increased longevityUpgrade Your Bushings A-arm bushings wear..

NOTE: Does not work with Fox Live Valve ShocksFeatures:Made with 1.5” x .138” wall steel DOM tubing0.5” larger than stock0.25” larger than our standard High-Clearance A-ArmsAdjustable lower pivot block for full camber adjustabilityUtilizes stock A-arm bushingsUV-resistant powder coat finishEasy to i..

NOTE: Does not work with Fox Live Valve ShocksFeatures:Unique bend design adds 1.5” of ground clearance1.25” tubing is 25% larger than stockAdjustable pivot blocks for full camber adjustabilityUtilizes stock A-arm bushingsUV-resistant powder coat finishEasy to installBacked by a lifetime warran..

Features:Provide an additional 1.5” of ground clearanceMade of high strength-to-weight ratio steel alloy—stronger than chromoly1/8” steel plating with 3/16” gussetsBoxed designPowder coated for maximum durabilityBacked by a lifetime warrantyAdd our rear A-arms for a total suspension overhaulTubed de..

Features:1.25” tubing is 25% larger than stockAdjustable pivot block for full camber adjustabilityIncludes high-quality bushings at no extra costUV-resistant powder coat finishEasy to installBacked by a lifetime warrantyPush your Talon to its LimitsGetting hung up on rocks and logs can put a damper ..

Features:Adds a 1.5” forward offsetAdds 1.5” of ground clearanceFit up to 34” tiresMade with 1/8” heavy-duty steel platingAdjustable pivot blocks for full camber adjustabilityUtilizes stock A-arm bushingsUV-resistant powder coat finishEasy to install—includes bushing removal toolBacked by a lifetime..

NOTE: Does not work with Fox Live Valve ShocksFeatures:Adds a 1.5” forward offsetFit up to 32” tiresMade with 1.5” x .138” wall steel DOM tubing0.5” larger than stock0.25” larger than our standard High-Clearance 1.5” Forward Offset A-ArmsAdjustable lower pivot blocks for full camber adjustabilityUti..

Features:Adds 1.5” of forward offsetFit up to 34” tires*1.5” tubing is 25% larger than stockAdjustable lower pivot block for full camber adjustabilityUtilizes stock A-arm bushingsUV-resistant powder coat finishEasy to installIncludes bushing removal and insertion toolBacked by a lifetime warrantyMor..

UHMW Material Made with UHMW Self-lubricating material Low wear characteristics Machined product Works with SuperATV and OE A-arms Kit includes: All bushings for front and rear suspension (40) Bushings (20) Replacement steel sle..

Get the Most out of Your Suspension Whether it’s a quick evening ride or a long weekend adventure, the last thing you want is for that trip to be cut short because your weak A-arms got wrecked. Luckily, SuperATV has what it takes to keep your Kawasaki Mule Pro going strong over the roughest trails..

The Suspension Upgrade You Need Your Kawasaki Mule Pro was built for working hard and playing harder. But sometimes, that stock suspension just isn’t up for the task at hand. That’s why SuperATV designed these High Clearance 1.5” Rear Offset A-Arms. The unique bend design delivers extra clearance ..

Features:Adds 1.5” of forward offsetFit up to 28” tires1.25” tubing is 25% larger than stockAdjustable pivot blocks for full camber adjustabilityIncludes high-quality UHMW bushings at no extra costSteering stop kit includedUV-resistant powder coat finishEasy to installBacked by a lifetime warrantyBi..

UHMW Material Designed for SuperATV & OEM arms Much better wear characteristics than stock Self-lubricating Machined product Kit includes: (28) Bushings (18) Replacement sleeves Enough bushings for a-arm pivots (rear spindle bu..

NOTES:Fits 28.5” tires if front inner fender pans are installed due to recallMust use 1” wheel spacers if you have 12” or smaller diameter wheelsDoes not fit Teryx 4 SFeatures:Adds 1.5” of forward offsetFit up to 30” tires with SuperATV Front and Rear A-arms1.25” tubing is 25% larger than stock..

The Suspension Upgrade You Need Your Kawasaki Teryx was built for working hard and playing harder. But sometimes, that stock suspension just isn’t up for the task at hand. That’s why SuperATV designed these High Clearance 1.5” Rear Offset A-Arms. The unique bend design delivers extra clearance and..

NOTE: Not compatible if machine has OEM winch and winch mount installedFeatures:Adds 1.5” of forward offsetAdds 1.5” of ground clearanceFit up to 35” tiresMade with 1/8” heavy-duty steel platingAdjustable upper pivot blocks for full camber adjustabilityUtilizes stock A-arm bushingsUV-resistant ..

Features: Made with self-lubricating UHMW Low-wear characteristics give you more miles than stock bushings CNC machined for a perfect fitA Better Bushing You ride hard on your KRX. You fly through winding trails and barrel over wild rock gardens. That all beats your stoc..

NOTE: Not compatible if machine has OEM winch and winch mount installedFeatures:Adds 1.5” of forward offsetFit up to 37” tiresMade with 1.5” x .138” wall steel DOM tubing0.5” larger than stock0.25” larger than our standard High-Clearance 1.5” Forward Offset A-ArmsAdjustable pivot blocks for ful..

Features:Made with 1/8” heavy-duty steel platingReinforced with internal and external gussetsMaintains factory rear alignmentStylish lookUV-resistant powder coat finishCustomizable SuperATV logo plateBacked with a lifetime warrantyKawasaki Teryx KRX 1000 Rear Trailing Arms That Look GoodYour KRX was..

NOTE: Not compatible if machine has OEM winch and winch mount installedFeatures:1.5” forward offsetFit up to a 34” tireMade with 1.25” diameter steel tubingHigh-clearance bends give you extra ground clearance without a liftAdjustable pivot blocks for full camber adjustabilityBuilt-in steering s..

Features:Adds a 1.5” forward offsetFit up to 30” tiresMade with 1.5” diameter tubing0.5” larger than stockAdjustable lower pivot block for full camber adjustabilityUtilizes stock A-arm bushingsUV-resistant powder coat finishEasy to installBacked by a lifetime warrantyGame-Changing on Rough TerrainCr..

Features:Made with 1.5” x .138” wall steel DOM tubing0.5” larger than stockAdjustable pivot blocks for full camber adjustabilityUtilizes stock A-arm bushingsUV-resistant powder coat finishEasy to installBacked by a lifetime warrantyA Tougher Suspension for Rougher RidesEvery rough ride comes with ch..

Moheadz Customz A-Arms for Polaris Ranger 2018-2020 NBSMoheadz Customz prides it’s company in designing some of the strongest a-arms on the market. The a-arms for your Ranger are constructed from 0.250" wall USA DOM and allows for a 35" tall tire. They are portal compatible and allow for a..

Moheadz Customz A-Arms for Polaris Ranger 2021-2024 NBSMoheadz Customz prides it’s company in designing some of the strongest a-arms on the market. These arms are constructed from 0.250" wall USA DOM and allows for a 35" tall tire. They are portal compatible and allow for all OEM hardware,..

Moheadz Customz A-Arms for Polaris RZR Pro (64" Models)Moheadz Customz prides it’s company in designing some of the strongest a-arms on the market. hese arms are constructed from 0.250" wall USA DOM and allows for a 37” tall tire. They are portal compatible and allow for all OEM hardware, ..

Moheadz Customz Can-Am Commander Rear A-Arms These arms are constructed from 0.250" wall USA DOM and allows for a 35-37" tall tire depending on model. Arms are portal compatible and allow for all OEM hardware to be reused. Arms do not include bushings (unless selected below) or grease fittings; you..

Moheadz Customz Can-Am Defender Rear A-Arms (62” Models)Beef up your Defender with these rear arched a-arms by Moheadz Customz. These arms are constructed from 0.250" wall USA DOM and allows for a 35" tall tire. They are portal compatible and allow for all OEM hardware to be reused. A..

Moheadz Customz Can-Am Defender Rear A-Arms (65” Models)Beef up your Defender with these rear arched a-arms by Moheadz Customz. These arms are constructed from 0.250" wall USA DOM and allows for a 36" tall tire. They are portal compatible and allow for all OEM hardware to be reused. A..

Moheadz Customz Can-Am Defender Rear A-Arms (65” Models)Beef up your Defender with these rear arched a-arms by Moheadz Customz. These arms are constructed from 0.250" wall USA DOM and allows for a 37" tall tire. They are portal compatible and allow for all OEM hardware to be reused. A..