Polaris RZR XP 1000 High Clearance 1.5" Forward Offset A-Arms (Chromoly)

Features:

• Adds 1.5” of forward offset
• Fit up to 33” tires
• 1.25” tubing is 25% larger than stock
• Adjustable pivot blocks for full camber adjustability
• Includes high-quality UHMW bushings at no extra cost
• Includes threaded ball joints that are 3x stronger than stock
• UV-resistant powder coat finish
• Easy to install
• Backed by a lifetime warranty

A-Arms That Do More
What can your Polaris RZR XP 1000 do with more ground clearance and a longer wheelbase? Take your RZR down rougher trails at higher speeds. Climb steeper hills and crawl over rougher obstacles. With SuperATV’s High Clearance 1.5” Forward Offset A-Arms, you’ll have the clearance and stability to take on so much more. Combine that with 25% larger tubing, chromoly construction, threaded ball joints, and full camber adjustment, and you’ll be unstoppable.

Ground Clearance for the Trail Less Traveled
Thanks to our unique dual-bend design, these A-arms give you 1.5 inches of extra ground clearance without a lift. And thanks to the 1.5” forward offset, you can clearance for up to 32” tires. That’s quite a boost for just changing out A-arms. Ride harder, ride higher, and enjoy all the benefits of a lift with a set of A-arms that rock.

Chromoly Construction for Unmatched Strength
We use 1.25” diameter chromoly tubing with a 3.5 mm wall thickness. That’s 25% larger than stock plus one of the strongest steel alloys on the market. They’re the toughest A-arms on the market made even stronger with threaded ball joints. They’re finished with a UV-resistant powder coating for durability and to make them look awesome. Finally, we give you free UHMW bushings preinstalled. They’re ultra abrasion resistant and self lubricating for years of use.

We believe in the strength of our A-arms so much, that they’re backed by a lifetime warranty. Put the pedal down and do your worst. We’ve got your back.

Includes Threaded Ball Joints—3x Stronger Than Stock
What makes SuperATV’s Threaded Ball Joints so strong? We use heavy-duty 4340 steel and a stud design that doesn’t taper down like stock. What makes them truly unique, and stronger than other ball joints, is the M38 threads around the housing that lets you thread it easily into our threaded A-arms and secure it with thread locker and a snap ring. They’re stronger and easier to install which means you spend less time in the garage, and more time pushing your machine harder than you thought possible.

Industry Leading Camber Adjustment
Our adjustable pivot blocks give you full control of your camber. We set them to stock specs so you don’t have to change them if you don’t want to, but if you add weight to your cab or install a small lift kit, you can adjust our pivot blocks to reduce tire wear and keep everything running smooth.